High resolution electric shutter
Thanks to an automatsic shutter speed adjustment function, the BGS-HL series has the advantage of accurately
detecting Black non-reflective surfaces as well as shiny reflective surfaces.
The Automatic shutter speed adjustment function minimizes the error caused by differences in reflectivity of object color and material.



Digital subpixel processing
Subpixel processing divides one pixel into sub pixels and enables accurate detection of peak.

Automatic sampling function
In addition to standard feedback, received light to laser power, BGS-HL has Automatic Sampling function which enables stable detection of metal surface and also black material by adjusting sampling speed.

Easy to see digital panel
・ 4 Digit display in small case
・ Easy setup by 4 buttons
・ Functions are like high-end

Ideal for robot mounting
Ideal for mounting on robot cylinder thanks to compact dimensions and the light weight. IP67 water tightness is also secured.

The minimum detectable height difference of 0.08 mm
(BGS-HL05**)
Perfect for applications that require sensing the height difference of very thin parts, inclination, and overlap (seam) detection.

BGS-HL series
Cable type |
Aluminum housing |
BGS-HL05T |
BGS-HL25T |
BGS-HL25T2 |
SUS housing |
BGS-HLM05T |
BGS-HLM25T |
BGS-HLM25T2 |
Connector type |
Aluminum housing |
BGS-HL05T |
BGS-HL25T |
BGS-HL25T2 |
SUS housing |
BGS-HLM05T |
BGS-HLM25T |
BGS-HLM25T2 |
Sensing distance |
20・0mm |
50・50mm |
Repeatability |
0.01mm |
0.1mm |
Minimum detectable height difference |
0.08mm |
0.8mm |
Light source |
Red laser diode (wavelength 655nm) |
Max. output : 390 μW |
Max. output : 1mW |
Laser class |
IEC / JIS |
Class 1 |
Class 2 |
FDA |
CLASS II |
Spot size |
φ0.8mm |
φ1mm |
Response time |
Default : 1.5・.5ms |
Default : 3~15ms |
Hysteresis |
0・2.49mm (default:0.15mm) |
0~149.9mm (default:1mm) |
Indicator |
Laser indicator : Green / Output indicator : Orange / Mode indicator : Red |
Digital display |
7 segment 4 digit LED display |
Adjusting sensing distance |
Teaching / Manual |
External input |
Laser OFF, Teaching, Sample & Hold, One shot |
Control output |
NPN/PNP max.100mA/DC24V (Residual voltage 1.8 V max.) |
Operating mode |
Light ON/Dark ON selectable by setting |
Timer |
OFF / On delay / Off delay / One shot (0~9999ms) |
Power supply / Current consumption |
DC12・4V including 10% ripple (p-p) / 40mA max. |
Protection circuit |
Reverse connection protection, Overcurrent protection |
Protection category |
IP67 |
Operating Temp. / Humid. |
-10 ・50℃ / 35 ~ 85% RH without freezing or condensation |
Storage Temp. / Humid. |
-20 ・60℃ / 35 ~ 85% RH |
Ambient illuminance |
Incandescent lamp: 5,000 lx max. |
Vibration resistance |
10 ・55Hz, Double amplitude 1.5mm, X,Y,Z for 2 hours |
Shock resistance |
500m/s2 ( approx. 50G) X,Y,Z 3 times each |
Material |
Case : <Alminum type> Aluminum / <SUS type> SUS, Front lens : PPSU, Display : PET |
Weight |
Cable type : Approx. 90g, Connector type : 30g |
Bundled accessories |
Mounting bracket : BEF-OD1-B (for cable type) / BEF-OD1-A (for connector type), M3 screw* 2pieces |
The specifications are based on the condition unless otherwise designated: Ambient temperature: 23℃ , Supply voltage: 24VDC, Sampling period: 500μs, Averaging: 512, Measuring distance: Center of the range, Testing object: White ceramic
※ 1 Display shows 0.00~30.00 (BGS-HL05**) / 0.0~200.0 (BGS-HL25**). When “shift function” is ON, display shows 0 at the teaching position. The display is available to show number in the range as follows. -7.50~37.5 (BGS-HL05**), -50.0~250.0 (BGS-HL25**)
※ 2 Sampling period : 1000 μs
※ 3 Hysteresis setting : 0.02 (BGS-HL05**), 0.2 (BGS-HL25**)
※ 4 Defined with center strength 1/e2(13.5%) at the center. There may be leak light other than the specified spot size. The sensor may be affected when there is a highly reflective object close to the detection area.