Danh mục sản phẩm

Laser Sensors optex fa D series - Cảm biến laser optex fa

Giá:
Liên hệ

Repeat Accuracy

Very tight Repeat Accuracy, 0.2 - 0.3 mm for BGS type.
Even Thru-beam and Retro types have 0.3mm Repeat Accuracy (*). 
* = Tested at the middle point of sensing range.

Repeat Accuracy

CMOS Image Sensor

CMOS Image Sensor

 

Pushbutton Teach with Fine Adjustment

In addition to a Teach button there are also two threshold adjustment buttons.
Fine adjustments can be made to the threshold value after Teaching by using the adjustment buttons.

Pushbutton Teach with Fine Adjustment

Timer functions

The pushbutton teach models of the D series have built-in Timer functions for added flexibility.

Timer functions

 

Remote Input

The DR-Q and BGS-DL sensors have a Remote Teach input that can be used to remotely set the sensor sensitivity.

Remote Input

Class 2/Class II IEC, FDA Regulation

The D series conforms to Class 2 (IEC) and Class II (FDA) regulations.

Class 2/Class II   IEC, FDA Regulation

The world's first Laser / BGS with CMOS Image Sensor BGS-DL series

BGS (Background Suppression) type sensors are the most accurate method of diffuse sensing, BGS sensors are able to detect objects without being influenced by either the background or the color of the workpiece.
A conventional LED - BGS sensor is accurate, but a Laser CMOS - Laser BGS sensor is able to detect black and/or highly reflective surfaces reliably.

Great combination ; Laser and CMOS Image Sensor shuts out environmental influence.

CMOS Image Sensor system can detect light quantity at each CMOS pixel under well controlled shutter speed, therefore it sharply detects the peak value in the viewfield of sensor while PSD detects mean value of peaks as shown below.
Actually it means CMOS Image Sensor System is the ideal way for such objects having reflecting and/or rough surface.

Great combination ; Laser and CMOS Image Sensor shuts out environmental influence.

FGS Function, the best solution for fluttering conveyor.

The BGS-DL series BGS sensors also have a FGS function built-in.
The FGS function monitors the surface of the conveyor, if the reflected light from the conveyor is interrupted by the workpiece the output is activated.
The FGS sensor is similar to a retro-reflective sensor but it operates in a diffuse mode.
Therefore the FGS sensor is best for detecting black, reflective, thin, or rough surfaces moving on a conveyor.

FGS Function, the best solution for fluttering conveyor.

For thin workpieces on a fluttering conveyor.(BGS-DL10T)

For thin workplaces on a fluttering conveyor.(BGS-DL10T)

Stable detection of thin workpieces on a conveyor is available even if the conveyor is fluttering.

Any transparent object,PET / Glass / Plastic.(DR-Q150)

Any transparent object,PET / Glass / Plastic.(DR-Q150)

Retro-reflective type DR-Q series was designed to detect any transparent object PET, Glass and Plastic.

Positioning for ink printer(DR-500)

Positioning for ink printer(DR-500)

High speed and accurate positioning is available due to the laser beam and quick response time 0.5msec.

Stable sensing of aluminum pouch(DR-

500)

Stable sensing of aluminum pouch(DR-500)

Stable detection of thin object on the conveyor utilizing the small spot size of laser beam.

 

BGS-DL series

Model Laser CMOS BGS (Teach-in type) Manual adjust Potentiometer type
Type Accurate type Long distance type Accurate type Long distance type
Cable type BGS-DL10TN (or DL10TP) BGS-DL25TN (or DL25TP) BGS-DL10N (or DL10P) BGS-DL30N (or DL30P) BGS-DL70N (or DL70P)
M8 connector type BGS-DL10TCN (or DL10TCP) BGS-DL25TCN (or DL25TCP) BGS-DL10CN (or DL10CP) BGS-DL30CN (or DL30CP) BGS-DL70CN (or DL70CP)
Sensing distance 40-100mm 100-250mm 40-100mm 100-300mm 100-700mm
Spot size φ1mm / 80mm φ2mm / 200mm φ3mm / 80mm φ6mm / 200mm
Sensitivity adjustment Push button Teach with fine adjust buttons 4-turn potentiometer
Hysteresis 3% / 80mm 10% / 200mm 5% / 80mm 5% / 200mm 5% / 300mm
Supply voltage DC10-30V including 10% ripple (P-P)
Power consumption 50mA max (12V), 35mA max (24V) 35mA
Response time 1.5msec Max(fixed sensitivity) 0.7msec
Timer Off delay/On delay/One shot delay (1msec increment : 0-999msec, 1sec increment for 1-10 sec) N/A
External input Remote Teach / Laser OFF selectable N/A
Light source Red Laser Diode 650nm, Max 1mW 300s, Class 2 Red Laser Diode 650nm, Max 2mW 6s, Class 2 (Max 3mW for BGS-DL70)
LED Indicator Output indicator (orange), Laser emission (green)
Digital indicator 7 segment, 3 digit Red LED N/A
Control output NPN or PNP open collector DC30V 100mA max
Operating mode Light/Dark On selectable
Operating temp / humidity ・0 to 50 oC / 35-85% RH
Insulation resistance 20M Ohm or more (at 500V DC)
Protection category IP67
Conformity IEC, CE
Shock resistance 50G (500m/S²) , XYZ 3 directions
Environmental illuminance Sunlight: 10,000 lux, Incandescent lamp: 3,000 lux max
Materials Anti-bacterial ABS (housing), PMMA (lens)
 

DT series (Laser thru-beam) / DR series (Laser retro-reflective)

Model Potentiometer adjustment type
Type Thru-Beam Retro reflective
Cable type DT-4000N (or 4000P) DR-500N (or 500P)
M8 connector type DT-4000CN (or 4000CP) DR-500CN (or 500CP)
Sensing distance 40 meter 5 meter
Spot size 15mm/5 meter 20mm/3.5 meter
Sensitivity adjustment 1-turn potentiometer
Supply voltage DC10-30V including 10% ripple (P-P)
Power consumption 40mA 30mA
Response time 0.5msec
Light source Red Laser Diode 650nm, Max 2mW 4s, Class 2
LED Indicator Output indicator (orange), Laser emission (green)
Digital indicator N/A
Control output NPN or PNP open collector DC30V 100mA max
Operating mode Light/Dark On switchable
Operating temp / humidity -10 to 50 oC / 35-95% RH
Insulation resistance 20M Ohm or more (at 500V DC)
Protection category IP67
Conformity IEC, CE
Shock resistance 50G (500m/S2) , XYZ 3 directions
Environmental illuminance Sunlight: 10,000 lux, Incandescent lamp: 3,000 lux max
Materials Anti-bacterial ABS (housing), PMMA (lens)
 

DR-Q series

Model Transparent type
Type Accurate type : For filled bottle Long distance type
Cable type DR-Q150TN (or Q150TP) DR-Q400TN (or Q400TP)
M8 connector type DR-Q150TCN (or Q150TCP) DR-Q400TCN (or Q400TCP)
Sensing distance 1.5 meter 4 meter
Spot size 15mm / 1.5 meter 20mm / 3.5 meter
Sensitivity adjustment Pushbutton teach with fine adjustment button
Supply voltage DC10-30V including 10% ripple (P-P)
Power consumption 35mA
Response time 0.7 msec
Timer Off delay/On delay/One shot delay (1msec increment : 0-999msec, 1sec increment for 1-10 sec)
Light source Red Laser Diode 650nm, Max 2mW 4μs, Class 2
LED Indicator Output indicator (orange), Laser emission (green)
Digital indicator 7 segment, 3 digit Red LED
Control output NPN or PNP open collector DC30V 100mA max
Operating mode Light/Dark On selectable
Operating temp / humidity ・0 to 50 oC / 35-95% RH
Insulation resistance 20M Ohm or more (at 500V DC)
Protection category IP67
Conformity IEC, CE
Shock resistance 50G (500m/S2) , XYZ 3 directions
Environmental illuminance Sunlight: 10,000 lux, Incandescent lamp: 3,000 lux max
Materials Anti-bacterial ABS (housing), PMMA (lens)