In addition to vibration resistance,the epoxy filled housing results in an IP67 rating.
Fast Response 200 micro sec, 10±2mm sensing distance (Mark sensor J3M type)
A latest Green LED with physical composition of GlanN2.
It's best for mark sensing.
An IP67 rating is guaranteed by filling the sensor body with epoxy.
The 100G shock resistance rating protects the sensor against mechanical vibration.
The built-in microcomputer provides a convenient means of setting the sensor.
There is also a remote Teach function that allows the sensor to be set remotely.
BGS-S/H15 : Built-in FGS function
The BGS-S15 and BGS-H15 sensors are able to operate as FGS (foreground suppression) sensors.
The FGS function senses the surface of the conveyor and uses this as a reflector, the sensor will detect thin and/or flat objects positioned on the conveyor.
A standard diffuse reflective sensor could be used in this application but adjusting the sensitivity is sometimes difficult, the FGS function is easily adjusted and will operate in a manner similar to a retro-reflective sensor without the reflector.
Ideal for detection of small objects
φ1.5mm of small spot size (BGS-3JH05)
Small spot in a BGS sensing system.
||Retro-reflective Narrow View
||*H = Head-on, S = Side-on
||10 +/- 2m
||0.05 - 1m
||15 - 50mm/18%